Summary of that article: The 'QWERTY was developed to slow down the typist' story is a lie. There is no serious evidence that Dvorak is a 'better' layout. If you were starting from scratch, there would probably be no advantage choosing one over the other, except that QWERTY is the standard. Retraining is a waste of time.
One of the key quotes:
> The study design directly paralleled the decision that a real firm or a real government agency might face: Is it worthwhile to retrain its present typists? If Strong's study is correct, it is not efficient for current typists to switch to Dvorak. The study also implied that the eventual typing speed would be greater with QWERTY than with Dvorak, although this conclusion was not emphasized.
I have no reason to believe that the Workman layout offers any other advantages.
>For example, A. Miller and J Thomas, two researchers at the IBM Research Laboratory, writing in the International Journal of Man-Machine Studies, conclude that "no alternative has shown a realistically significant advantage over the QWERTY for general purpose typing."
OK, great. What was the name of the paper? Was it even in a peer reviewed article, or was it an op-ed? And when did they say it? The rate of research into keyboard layouts has been a trickle. If they said that in 1975, then it's not particularly useful today.
In fact, there have been a few studies that have in one way or another demonstrated superior qualities of Dvorak:
http://www.st.ewi.tudelft.nl/~buzing/Articles/keyboards.pdf
http://atri.misericordia.edu/Papers/Dvorak.php
(admittedly both of those were published after the Reason article, but I'm not going to spend all night looking for pre-1996 articles)
The article also claims that studies show only "a few percentage points" difference between QWERTY and Dvorak. How can this be, when the total typing distance for QWERTY was nearly twice that of Dvorak on Don Quixote?
So why are we seeing quote and number mining, more typical of political discussions, in an article about keyboard layouts? Well, to understand that, we need to understand Reason's bias, and then read the last paragraph.
And then all becomes clear. This isn't about uncovering the truth about ergonomics and keyboard layouts. It's about scoring a few points for the ol' free market. My guess is that one of the authors was having an argument at a party, and someone drunkenly suggested that QWERTY vs. Dvorak was a great example of the free market failing. "This will not stand!" the writer shouted at the sky, and then proceeded to write a five page article about how "nuh uh".
The reason is that it's a popular example of path dependence, where previous decisions affect the best possible current choice. This undermines their economic theories (the authors are economists). So don't expect them to be an unbiased source on this.
They also, for example, claim that Windows is the best OS, and that network effects have no impact on people choosing to use it
The typing speed record, while it still existed, was held by a dvorak typist. I can type at 130-140wpm using qwerty and feel like it's almost impossible to go any faster, while it's not uncommon to see dvorak users typing 160wpm+. If anything, the reduction in total finger travel is enormous.
Without seeing some kind of properly conducted scientific test that examines a range of conditions (age, native language, current typing ability on QWERTY, typical typing material, etc) it doesn't seem worth the effort. If Dvorak (or Workman) is that much better, then it's surprising nobody has been able to conduct such a study.
In my experience typing on dvorak is much more comfortable. Speed wise i maybe reached the same level as my qwerty after almost a month but for me the biggest wow factor was the comfort. Your hands are really never twisting, most of the time you are just using the home row. It's like holding a gamepad where all the keys you need are designed to be in just the right position, not having jump and fire mapped to the start and select-button.
In the end i still switched back to qwerty because I'm using way to many other computers than my own throughout a day and need to be fast on all of them.
When people tell me that QWERTY is uncomfortable, slow, etc, I honestly have no idea what they're talking about. For me, the problem is sitting in a chair staring at a screen all day.
I stopped taking that comment remotely seriously when it claimed:
> As a matter of fact, it is a well known and well documented phenomenon in the literature that if you train at close to maximal capacity on the same training regimen for longer than 3 to 4 weeks, you will stop making gains. You'll see big increases the first 3 weeks, and after that, nothing. This is a nervous system effect.
... which most people who have done heavy weight lifting for example can tell you is at best wildly misleading, and at worst, pure, unadulterated bullshit.
To flatten out after 3-4 weeks would take such extreme over-training, at stress levels way beyond what even most high level athletes would normally even able to achieve in training, that it is extremely unrealistic for most people to every experience it. Certainly not "just" by training at something until you feel you can't do any more. At that point most people are not anywhere near a real maximum.
I don't lift to a "training" 1RM (maximum weight I can at any time lift once) every week, much less manage/try to stress myself into a real max. (the reason for distinguishing these, is that it is normal that you can lift up to 10% +/- more in high stress situations like competitions), so maybe what I do don't count in that guys eyes. But I exercise large compound lifts to near failure (that is, until I have good reason to think that I will be unable to complete the next repetition) every workout - 3-4 times a week. So I'll hit my training 5RM, 3RM, 1RM for the various lifts on consecutive weeks. They are reasonably interchangeable. If I feel good enough, I may go for a 1RM to try to set a new personal record even if it's not the "right week".
And see slow but steady improvement for months on end before I shake anything up, and when I do change things, it is mainly for other reasons - some progressions may follow the same program for years. Changing too often does not help - it just confuses you tracking.
Most people are far more likely to run into limitations due to form/technique failures or lack of flexibility that they need to fix than due to any CNS limitations.
Gains do slow down as you get closer to your limits, and you certainly can over-train, but it takes a lot to over-train so badly that you stop seeing gains after 4 weeks even when you massively brutalise major muscle groups on a semi-daily basis. I can't even imagine what you'd need to do to overload your nervous system from typing in that short time-span.
The last sentence isn't supported by the prior, assuming you want to improve your typing.
Let's say that dvorak and qwerty just as "good"/"bad" and that there would be no advantage choosing one over the other. Then retraining is probably not a waste of time because when retraining you don't pick up bad practices, like you did when you first started to type (not knowing better).
It probably is easier to start from scratch than trying to relearn some subtle parts of something you've done every day for for over a decade. Also, the motivation to learn qwerty better isn't as big compared to dvorak where you are forced to make progress to be able to do anything useful.
Yes, there is, and it's even presented in the article. Finger distance traveled if horrible for QWERTY compared to other layouts.
I did not regret my decision (far from it), as Dvorak is indeed nice to type and quite readily available out of the box.
Normally you don't get much benefit from switching layouts though. Especially as developer. As an author or someone who is writing prolonged texts in plain English, yes it's definitely an advantage. Yes, it's also more fun to type. But really, QWERTY is good enough in most cases. You don't really need to bother.
100% of the layouts still treat symbols as second class citizens.
my typing would vastly improve if a keyboard simply added another row for symbols so they are one key press only.
changing layouts only help in a few cases and turns using somebodyelses computer or a phone or a tablet or a virtual keyboard or remote vim sessions, etc a royal pain in the ass, because they will be qwerty.
Here's a link to download my .keylayout file (goes in ~/Library/Keyboard Layouts): https://www.dropbox.com/s/8hy5391ay2u0dta/US%20Symbols.keyla...
I do understand that there should be room for improvement. The situation is just so much worse if you look at other layouts as base line..
As a bonus I map Shift to the right Win key so that I can press it with my thumb as well. Using the thumb for Ctrl is also doable but it's a little annoying when you need to use the same hand for the combo.
Hover your mouse over "Ebene 3" here: http://neo-layout.org/
I don't know if QWERTY is even a good layout but what does it matter? Isn't the best keyboard layout the one you already know?
Thinking about it now, I can't think of any common digraphs or trigraphs that are inconvenient to type on a qwerty keyboard. Don't fix what ain't broke.
However, just switching keyboard layouts doesn't fix things. I once switched to Colemak for a couple of months. My hands felt better, and typing on my own machine was way more comfortable. But every other keyboard I interacted with made me look like a dude twice my age with some kind of senility disorder.
To really get the benefits of a better layout, you have to not switch, but rather add a new keyboard fluency, while maintaining QWERTY proficiency. That made the cost-benefit equation very different for me... and I went crawling back to my old abusive partner, QWERTY.
After years of using Colemak (and not practicing QWERTY regularly), I've found that QWERTY is actually getting easier again. I'm not fast with it, but I no longer have to think hard to recall positions or look down at the keyboard. It feels like my brain said "Oh this is how keyboards work now" and rearranged the QWERTY structure in my brain to do Colemak instead. Now after years of having to occasionally use QWERTY, my brain seems to have built a semi-competent second typist, so to speak.
Changing your keyboard layout isn't going to fix bad habits and the things you have to do to stay healthy (stretching, taking breaks, and strengthening).
Of course, now I know how to touch-type and I'm quite comfortable with Dvorak, so I'm not sure I could muster the mental energy to switch to this Workman layout, pleasant-looking as it is. The biggest drawback of Dvorak is indeed the L and R keys... but I guess my finger muscles have strengthened or I'm just more used to it now, so it no longer bothers me.
The three most common english digraphs are TH, HE, AN, and they all require moving off the home row to type in qwerty. I consider this an inconvenience, one that doesn't exist in other layouts.
Of course there is a cost to learning a new layout, but if you're probably going to be typing for much of the rest of your life, the cost is very small.
- It is very hard to learn since muscle memory is very difficult to change.
- I think it would take me a while to be as fast as on my current layout QWERT[ZY].
- I see no real advantage for learning a new keyboard layout. None of my friends and coworkers ever complained about keyboard layout and the urge to change it.
- When you want to get things done, learning a new layout would be the last thing you want.
- You may not have your new keyboard layout available at different workplaces.
So I think this is just a hipster thing. Prove me wrong :)
- It is very hard to learn since your muscles are trained for driving a car
- I think it would take me a while to be as confident as in my current Monte Carlo LS
- I see no real advantage for learning a new automobile. None of my friends and coworkers ever complained about driving a car and the urge to change it.
- When you want to get from point A to point B, learning a new vehicle would be the last thing you want.
- You may not have a motorcycle available at different car rental places when you travel
Didn't really prove you wrong, and maybe I am a hipster :-)
I found it enjoyable learning a new layout. Maybe it was just for the sake of trying something new. My productivity didn't suffer since I never really abandoned QWERTY. I didn't utilize colemak in my work until I was relatively fluent. Learning workman might be an interesting weekend excursion, but I have no plans to use it for work until I'm fluent, if it is as fun to type on as colemak.
What? We have to wait till next year for a new harvest?!
Guys, we should just stick to moving around and hunting prey.
What were my reasons of trying new keyboard layout?
- "The hipster thing" (so that one doesn't count).
- Curiosity. I wanted to find out what the fuss is about - whether the talk behind it isn't just that, a hipster thing itself
- I like to learn and I love the feel of improving, of being better than the day before
- It's very comfortable once you get used to it.
Adressing your objections:
"- I think it would take me a while to be as fast as on my current layout QWERT[ZY]."
1. The time will pass anyway.
2. I never typed faster than on QWERTY, but I'm not really a typist. I'm not a court reporter. My productivity is not directly proportional to my typing speed. It's the thinking that takes most of the time anyway. So I can sacrifice some of the speed for the sake of comfort.
"None of my friends and coworkers ever complained about keyboard layout and the urge to change
This I believe, but as Henry Ford remarked: "if I had asked people what they wanted, they would have said faster horses." :)
"You may not have your new keyboard layout available at different workplaces."
That's obvious, but I, for one, don't change workplaces that often. And I only use two computers: one at home, one at work. Installing a preconfigured keyboard layout on a new machine takes a minute.
I mainly returned to QWERTY (I'm repeating myself again, but so be it) because English isn't my native language. All these alternative keyboard layouts are optimized for English. I use a QWERTZ mutation (PN-87 - rare and somewhat forgotten even in Poland) for typing in Polish. So sticking to QGLWMY could only ever make like 1/3 of my typing life better :) If I used no other language than English, I probably wouldn't have looked back.
You offer five cons, which _to_you_ outweigh the pros – which are so obvious it seems redundant to even mention them, but let's just say, to sum it up, ergonomics.
It's very well known that full-time IT work takes a heavy toll on your body. That's why reasonable people make sure to work with decent posture, to take frequent breaks, and to exercise. It's why decent companies make sure to provide high-quality tools to help their employees stay healthy and avoid injury.
And it's why some people are interested in improving the ergonomics of typing, which – as everyone knows – is fraught with the dangers of repetitive stress.
That doesn't mean that keyboard layout choice is the most important thing in IT ergonomics. But for some people, switching to Dvorak or Colemak or whatever else seems like a reasonable choice, and many of them, myself included, are very satisfied with it, even while working in a collaborative environment where others use QWERTY.
For you to call this "just a hipster thing" is embarrassingly dumb! Do you say the same about ergonomic keyboards, rollermice, and saddle chairs?
- My laptop keyboard
- My iPhone keyboard
- My iPad keyboard
- Car navigation keyboard
- Keyboard on my Google TV remote control
- Keyboard on copy machine at work
It's somehow impossible to change all those keyboard layouts and if you change a few of them then you will be confused when typing.
(These environmental cues can be funny sometimes - if I use emacs for editing C++, which I do only very rarely, I keep missing out semicolons. Because most of the time, if I'm programming, and my eyes can see emacs, my fingers know I'm using python.)
Though, now that I think about it, alternating between keyboard layouts is really no different than using a modal editor like vim -- after a while it just becomes second-nature.
I'm building a custom mechanical keyboard (with blank keycaps) and I have changed the various function layers several times and had no problems with adjusting to that. It all comes down to the question what you do mostly and how easy you can get used to new layouts both physical and in software.
Nope: http://www.theatlantic.com/technology/archive/2013/05/the-li...
Obviously the claim that it was intended to slow typists down is unlikely. If the layout was rearranged in part to prevent jams, then it would have been rearranged so that nearby letters weren't hit in sequence. Without careful study of ergonomics, one wouldn't necessarily realize that that would slow a typist down. But it would probably prevent jams.
I also found some of the claims made in the paper very odd. They claim that because "SE" and "Z" are easy to mistake in Morse code, that those letters were placed near each other. How this would be helpful eludes me.
By the way, the jamming problem basically went away with the Remington II. QWERTY was obsolete less than 20 years after its inception.
Oh, and here is the obligatory link: http://www.dvzine.org/
I have one of those old indestructible IBM model M keyboards with removable keycaps. I love that keyboard. I decided I'd try to learn DVORAK and work with it regularly, so I did so. And I realized something: every time I'd work with a keyboard, I _will_ be working with QWERTY. There's no way I would request to an employer that I have a special keyboard just for me, or try to reconfigure software to support it.
So I went back to QWERTY. May not be ideal but I know everyone supports it.
Why not?
> or try to reconfigure software to support it.
Why not?
If there's a much better alternative out there that can make you more productive - and Dvorak has been one of those things for me - your employer should be jumping up and down in joy at throwing however many $10 keyboards at you as you're asking for.
There are also plenty of USB devices that convert between the two, or keyboards with hardware switches. Or, of course, in software. I use AutoHotkey, because keyboard layout switching in Windows is completely broken, and it works pretty well.
If that's your excuse for not using Dvorak rather than anything else, you're doing both yourself and your employer a huge disservice, especially if you're going to take that attitude to other things.
The point about the keycaps is valid, but ideally you shouldn't be looking at them anyways. Additionally, I learned Dvorak an a QWERTY labeled keyboard, and found that eventually I just associated the labels I saw with what I was actually typing.
We're talking about software here.
Edit: I forgot to mention one of the most important parts: it's incredibly fast once you know what you're doing.
I think ti could still be a good keyboard for phones but they seem to have died off and the layout is patented or something and so there don't seem to be any versions of it for android.
Has anyone ever tried determining a fitness function (travel distance, priority finger use, sequential characters on nearby fingers) and running random layouts through a genetic algorithm?
For sample data use english, romance languages, open source code, etc, for a good general purpose layout.
If you're going to relearn a layout it might as well be the optimum one.
He actually did do quite a lot of research of exactly this.
Also you should check out the carpalx project.
He definitely did quite a good job with the fitness function (bigrams, finger priority, etc), I just didn't see quite how he came up with the workman layout specifically. If he manually evaluated a few layouts and made tweaks, then surely there is further optimisation to be done for any given body of text. For something as central as a keyboard layout it seems like even those small gains could have huge effects.
I've always wanted to try an alternate layout, and this post led me to find minimak [2]. I'm typing with it right now and really enjoying the similarity to qwerty (only 4 keys changed) with reduced movement, plus 99% of my shortcuts remain the same.
I've never been strict enough with myself to learn touch typing (I still hit 120WPM so speed isn't an issue) and worry that the benefit won't be as obvious.
As well by reading this article I learned about the TypeMatrix keyboards [1] - I must say I am very intrigued by this idea - I would definitely order one if it contained a good trackpoint.
I myself learned touch typing first QWERTZ (German layout), then after moving to France had to learn AZERTY (the worst layout ever, especially for programmers). In the end because I had to travel and work on keyboards in different countries a lot - I decided to learn QWERTY US International, I configured it with AltGr Dead-Keys and now I am able to use the same layout where ever I go (even Russia and CIS countries) and on my computer I have all the accents for French, German and Turkish. So yes, I know it is not optimal for the Finger usage, but I need a keyboard layout that (a) is available on ALL stock computers, (b) on my computer can be enhanced to allow writing ALL the accents of European languages by using key-combinations.
I think alternative keyboard layout researches should take into account international usage.
But this is just my opinion.
[1] https://www.massdrop.com/buy/ergodox unfortunately, requires an account even to see the offers
For those who did not want to sign up for Massdrop just to check the prices, this is what it says at the moment:
This group buy is no longer available!
We can remind you when the group buys is back on: Requested!
1027 users requested this productWhat I'd like to see is some proper innovation like good programmer-usable chorded layouts that work with existing inexpensive hardware (I don't mind buying a good non-ghosting keyboard, but I don't want to pony up a few grand for a Velotype).
If we were indeed limited by input, why wouldn't this come up in discussions about languages like CoffeeScript (or even Python/APL) that save keystrokes to begin with? In the case of Coffee and Python, the keys saved are actually the hard-to-press symbols as well. And yet I've never heard the point come up.
Perhaps this is more about our need to feel superior by adopting a routine of cargo-cult efficiency than anything else. In the broader view of productivity, optimising keyboard layouts is more like optimising memcpy() in C. While it may bear some results, it's rarely the actual bottleneck.
We're not, at least not in the way you think.
> In the broader view of productivity, optimising keyboard layouts is more like optimising memcpy() in C. While it may bear some results, it's rarely the actual bottleneck.
This article is a solution developed by a someone in response to his own RSI problem, optimised for writing English with minimal strain, and presumably tested based on "how much do my arms hurt." So it's a solution/optimisation to a different problem altogether (which may or may not be relevant to you.)
Changing keyboard layout of library or university computers or basically any other computer than your own comes with a lot of trouble.
Yes it will slow you down when using QWERTY but if you are using both daily it is barely noticeable.
But what does really steam me about keyboards in general, is the numeric keypad. I'm right handed, so the mouse sits to the right of the keyboard. And of course the mouse gets used a lot. Which means my right hand is always swinging back and forth from RH keyboard home and the mouse.
Now it happens that I _never_ use the numeric keypad. Never have to enter large blocks of numeric data, and so am quite happy using the numeric top row. Used to it that way, and don't see anything wrong with it. So to reach the mouse I'm moving much further than I should have to, across the wasted space of the numeric keypad. Also if desk space is a bit tight I keep hitting the mouse on the RH side of the keyboard - again because of that extra length to the right.
It's a workspace centering thing too - the main area of the keyboard should sit on the centerline of the screen, to avoid small but persistent twisting of the spine and neck. But then the keyboard R end sticks way out, and the mouse movement field gets pushed further to the right.
It's been bugging me increasingly for years. I've found a few 'small' format keyboards without the numeric pad, but the designers always go overboard and think that 'small' means everything on the keyboard ought to be small - smaller keys, thin base therefore short key travel and terrible touch feedback, flat keytops (another pet hate - you get no tactile feeling of centering, and so have to keep watching your fingers type), compressed layouts of the existing keys (arrrgh!), and so on.
What I really, really want, is something like an old klunky and reliable IBM (like I'm typing on now) but with no numeric pad. No other change.
I'd long ago have simply taken a hacksaw to a standard keyboard and cut the numeric pad off, except guess where the controller IC _always_ is in keyboards? Right above the numeric keypad, of course.
It's so annoying! Why does no one, that I've ever been able to find, make a full size, heavy, long-key-travel, concave key-tops, easy-typing, standard layout (or Workman layout!) keyboard without that stupid numeric keypad?
In these days of USB it's especially dumb, since if someone really wanted a keypad as well they could just buy a separate keypad and plug it into a USB port. There's NO reason why it must be included in every damned keyboard in existence.
If anyone knows of such a thing for sale, I'd very much like to hear it. I'd buy several.
http://mkweb.bcgsc.ca/carpalx/?full_optimization
Take not of the script you can download to pipe your scripts to, and learn what is the best layout you actually need:
http://mkweb.bcgsc.ca/carpalx/?requirements
Here's a list of them:
http://deskthority.net/wiki/Keyboard_layouts
There was another that was truly optimized for use Coders, that is not Dvorak based. It had the Option key (⌥) as part of its modifiers. I assume it was called something like the coders layout? I don't recall. If any one can recall it, that would be awesome.
I've seen two problems with alternative keyboard layouts: a) they are not done for programming (keys ~|!<>_-/"' are oddly laid out) or they are not made for international languages (Spanish in my case, for which ñ,á,é,í,ó,ú are difficult to find. Or worse yet (in case of Dvorak) when using an "international" version, the programming-related keys are horribly placed.
Ideally (when I get time to fix it), I'll have a thumb key to hold down and get any programming symbol (optimized to Python for me) on or nearby the home row.
This has perhaps inspired me to give colemak (which retains the usual c/v positions) a shot.
OSX's "Cmd Qwerty" feature was nice, but didn't help in Inkscape (since it uses Ctrl) or Vim.
I wish the Programmer's Layout of this would take HJKL into account at least. That's and :wq being a nice "roll" down the top left of my keyboard are what keep me on QWERTY.
In terms of vim, I actually like it a lot more. j and k are typed with the left hand (coincidentally j is still on the left side - same as qwerty). The right hand does h and l (again, h is on the left side and maps to going left).
On the other hand, Eclipse is super annoying because it seems half the bindings are cmd qwerty and half are dvorak but that's another issue. I've started using Vrapper to get vim bindings in eclipse and that seems to be working out okay so far.
But, to be fair, typing is (or should be) a tiny fraction of your coding time. Even in Java.
So when I learned Dvorak, through touch typing, it affected my QWERTY skills exactly not one bit. The only way in which my QWERTY skills are now bad is through attrition, but it's still no problem to accomplish a reasonable percentage of my previous speed. It just comes up pretty rarely that I have to type on QWERTY these days, and if I do for a few minutes it's no problem.
It's as if the two are in completely different areas of my brain, and for anyone wanting to learn Dvorak, then this is a very easy way indeed.
has anyone noticed that while the distance traveled in dvorak is higher than both other alternatives, it alternates hands much more frequently (23% vs. 31%+ same hand frequency), and moves towards the top row more frequently than to the bottom one. I don't know about you but for me it's easier to extend my fingers top than it is to flex them towards the bottom row.
there is also less time spent on the number row, but repetitions with the same finger are more likely.
i still think there ought to be a better way to deal with special characters than shift keys
https://news.ycombinator.com/item?id=6541910
(make the number keys hide under the shift keys, as they are used much less frequently)
I've been a fulltime dvorak user for over 10 years. I also tried Colemak but found that many motions felt awkward while using it.
Anyways, I thought I'd give this one a try just for the hell of it. And... so far I am quite pleasantly surprised. I fully memorized the layout in about half an hour. It feels comfortable to type on, just like Dvorak does.
Typed up this comment with the Workman-P layout, and seriously considering switching to it now...
Could you please run the linux kernel sources through that statistics application?
I tried switching to Dvorak many moons ago, I'm feeling it may be time to have another crack at an alternative layout, both out of interest in improving efficiency and reducing strain.
All of these words are typed in Dvorak without any lateral finger movement, and only two letters outside the home eight.
'ls' is, however, awkward to type. That's why I alias it with 'd'; problem solved.
It is much more efficient to ride the momentum of a single arm or wrist stroke and type a combo rather than just one key.
This is not my experience:
An example of this is the word OPERATION. If you were to type this in Dvorak, you could type it as o-pe-r-a-t-io-n where each grouping is a hand stroke–a total of 7 hand strokes.
The letters 'pe' are the slowest typed for me when typing 'operation'. I strongly prefer alternation, as the finger on the opposite hand can be lined up on the upcoming key just as the current key is being typed. Having to move the hand around for keys that are on one side slows things down.
I enjoyed learing Colemak and I would probably enjoy Workman, but it isn't the most practical thing for me to do long term.
Also, a lot of the keybinds in vim or emacs are designed around certain ergonomics and being efficient in an editor is often a more useful thing for me than being efficient when I am typing.
I'm only using it on my Microsoft Natural 4000 ergonomic keyboard, and still using a regular QWERTY bog-standard-dell keyboard at work, which means I can still type pretty effectively on colleagues' computers.
I quite like it. It does seem to make a lot of sense.
Switching back and forth between a normal QWERTY board and Workman-on-a-special-board takes at most one sentence of brain-mush, but then it's fine.
The thing which slows me down the most I think is programming in VIM. I'm not going to remap anything, as all the commands I think of as sentences (c)hange-(i)nside-(t)ag, (d)elete-(t)il, etc. And there's a lot of muscle memory to overcome. Also with sh commands.
Still, I do like it.
One of the reasons I decided to go for Workman rather than one of the alternatives is that the whole column-layout for physical keyboards seems like a better design in general, so one day, if I can afford it, I will try and get one.
I have been really struggling with RSI for a years now, so along with changing layout, I'm also trying to take more breaks, sit with a better posture, etc. It does seem to be helping.
After 2 months of very irregular typing on it, this also being my first time doing 'formal' touch typing, I'm around 50wpm typing normal prose, which still feels a bit slow to me, but I am improving.
While alternative layouts strive to make typing easier, they invariably come up against the constraints of a grid-based key placement.
Using a genuine 'anatomic'/'ergonomic' placement would put reset the whole layout argument: how to optimize for a given language, with human-friendly placement of keys (say, using the Kinesis Advantage keyboard or equivalent). Now that would be an interesting experiment in layouts! (Would there even be a home row?)
And, BTW, I've 'forked' my usual Dvorak layout to make it easier for Lisp programming. We (particularly Linux users) tweak our window managers and screen accessories to individual perfection; why not our keyboard layouts too?
That's a kind of pet peeve, but if you are a programmer, depending of the language you use the most at a given time, the most used keywords and special characters won't be the same (i.e optimizing for lisp or perl would make wildly different layouts). For people also speaking non english languages, the most used letters won't be the same depending of the language as well. To try to come out with a new layout supposed to be efficient for everyone is a fool's errand.
If you want to use it with KeyRemap4MacBook this should save you a bit of time:
<item>
<name>Change Shift + Capslock to Esc</name>
<identifier>private.shift_and_capslock_to_esc</identifier>
<autogen>--KeyToKey-- KeyCode::CONTROL_L, ModifierFlag::SHIFT_L, KeyCode::ESCAPE</autogen>
<autogen>--KeyToKey-- KeyCode::SHIFT_L, ModifierFlag::CONTROL_L, KeyCode::ESCAPE</autogen>
</item>Of course, you may switch personally to an alternative layout, but the overall design used by everyone else will not change. It's just a burden for yourself to be able to type two different layouts with comparable speed as you cannot change the layout everywhere you use computers.
Read about it here: http://en.wikipedia.org/wiki/Keyboard_layout#Neo
Or take a good look at its multilevel layout here: http://neo-layout.org/ ("Ebene 3" is especially interesting for programmers…)
Compared to Qwerty writing Dvorak is so much easier on the hands. I would say the strain is reduced by 50% at least and it's potentially faster to type (less movement, less way).
I will never switch back to Qwerty unless someone forces me to do so.
I can't explain why exactly, but this layout just makes sense. Can't wait to try this out.
- Aliases for frequent shell commands - Remapping 'caps lock' to 'control' (on US keyboards)
These keyboard layout wars seem just too subjective to me.
sadly all alternative keyboard solutions are spoiled by riding the health bandwagon and are utter crap.
and the ones that aren't turn out to be so expensive they die (datahand) or get bought out and turned in non keyboard replacement products (fingerworks)