The top Mac Studio has six thunderbolt 5 ports, each of which is a PCIe 4.0 x4 link. Each is a 8GB/sec link in each direction, which is a lot. Going from x16 down to x4 has less than a 10% hit on games: https://www.reddit.com/r/buildapc/comments/sbegpb/gpu_in_pci...
Oculink is generally faster than TB5 despite them both using PCIe 4.0, because Oculink provides direct PCIe access whereas Thunderbolt has to route all PCIe traffic through its controller. The benchmarks show that the overhead introduced by the TB5 controller slows down GPU performance.
That's just blatantly wrong, the performance loss of GPUs is very well documented and gets worse as you go towards higher end models. We're talking 30%+ loss of performance here.
“In the more common situations of reducing PCI-e bandwidth to PCI-e 4.0 x8 from 4.0 x16, there was little change in content creation performance: There was only an average decrease in scores of 3% for Video Editing and motion graphics. In more extreme situations (such as running at 4.0 x4 / 3.0 x8), this changed to an average performance reduction of 10%.”
Sure. And lots of people need all that I/O. But my point is that it’s not like the Mac Studio has no I/O. The outgoing Mac Pro only has 24 total lanes of PCIe 4.0 going to the switch chip that’s connected to all the PCI slots. The advent of externally route PCIe is a development in the last few years that may have factored into the change in form factor.
