That's not what we're experiencing.
Screens have seen improvements, but not in a significant way within these 4-6 years. Keyboards haven't improved leaps and bounds. Track pads either. Laptop casings haven't seen innovation either.
The only thing that significantly changes is the motherboard, which is not nothing, but replacing it independently makes sense to me.
> port module idea.
That's one of the best idea they have! You might have bought a laptop with 4 USB ports 5 years ago, only to realize you'd be so much happier with two USB-A. Or you realize you never ever use the SD Card slot. Well, you'd fix that easily on a Framework, not on any other laptop.
I wish I could do that right now. The only reason I haven't one of their laptop is their stubborn refusal to ship outside a dozen or so countries.
Those painfully awful 1366x768 TN panels that used to be commonplace have finally mostly been ousted, too. As a result, chances are that the laptop you buy at nearly any price bracket in 2026 has a screen that’s moderately to dramatically better than was found in laptops in the same bracket up until 2020-2022.
The problems with the port modules are that due to their dimensions, the number of ports you can have on the laptop at once is small and the big voids in the chassis required for them to be able to slot in greatly weakens it and makes it more prone to flexing.
With an alternative design that uses internal port boards (still hooked up via USB-C) with matching exterior side plates, you could easily do something like 3x USB-C, 1x USB-A on the left and 1x Ethernet, 1x USB-C, 1x USB-A, 1x SD/microSD on the right in the same space as would’ve been taken by the modules for half as many ports. This would suit most users perfectly out of the box, precluding the need for swapping for many, but for those who need one side to be full USB-C or multiple NICs or a cell modem or something that’s still possible.
My personal needs are way smaller so I missed that part completely (on contrast IDK, I recently had a Surface Pro 8 next to a MBP 4 and it didn't strike me, but I might not be sensible enough to that)
> 1366x768
We've had HDPI for a decade now, that's truly awful.
> ports
Agreed, people needing more than 4 ports or caring a lot more about size are kinda SOL with the current modular setup.
Besides, the point isn’t even absolute max brightness, but the contrast ratio. OLEDs aren’t the brightest displays, but their contrast ratio blows pretty much everything else out of the water and that’s what makes you go wow when looking at an oled in a dark room. (At least it does for me, still, and I’ve got an oled tv in 2018.)
> The only thing that significantly changes is the motherboard, which is not nothing, but replacing it independently makes sense to me.
Laptop motherboards aren’t like desktop motherboards where you can define a big outline and fit standard parts within it. The laptop design leverages tight co-design with the enclosure for thermal performance. If you’re lucky and leave enough extra space then you can design next generation parts to line up neatly with the thermal solution of last gen, then cap it at the limit of whatever last gen was designed for. However the optimal solution will always be to co-design the chassis, thermal solution, and motherboard together.
The mobile Ryzen 3/5/7/9 processors from the current year have a configurable TDP up to the same max (54W) as the earliest Ryzen "H" processors from 2017. The first generation mobile Core i7 from 2009 had a TDP up to 55W. The mobile Pentium 4 from 2003 had a TDP up to 76W (which appears to be the high water mark). In any given generation there were also lower end models using less power across a power range that seems to be fairly consistent over time.
Why does the thermal solution need to be redesigned if the heat output hasn't materially changed in decades?
Most people only see this in MacBook Pros, but the other manufacturers have excellent screens that are often hidden behind customization options and complex models/branding.
I have a framework and love it, but it’s a computer made for a specific purpose that doesn’t align with most people. That’s ok - Dell makes like 500 different let laptops and Framework has a totally different proposition.
Trackpads were universally abysmal, with the sole exception of the macbooks. They all had the frustrating diveboard design, every single one at every price point from every manufacturer. I’m sure you can buy laptops with decent trackpads online, but they had none in the store, macbooks excepted.
Keyboards were all over the place, but I notice that even some premium models are now carrying generic low end keyboard parts with weak travel, lack of key separation, num lock mashed into the backspace, and awkward arrow key layout. If anything I think keyboards are getting worse.
Screens are the one place where I’ll say things have improved noticeably, especially colors and black levels, although getting over 200 ppi and 500 nits is still a rare treat, and that is my bar for a compromiseless display.
You're comparing Apple to unnamed computers brands you touched at a random place, I'm not sure what to make of it.
For instance how does the Macbook Air compare to the current 13" Surface Laptop ? Is that what you call diveboard design and awkward arrow key layout ?
Apple obviously produces the only product incorporating a touchpad that applies any significant, deliberate thought about it.
Luckily they are still improving and we now have Tandem OLED with about double that.
This is an oddity of the PC laptop market I have never understood - Mac trackpads from a decade ago are still better than a top-of-the-line PC trackpad from the current year.
The only thing Apple has done in that decade is make their trackpads slightly bigger (and made the click haptic rather than physical), so it feels like the PC folks should have caught up by now...
The other is that I don’t think most laptop vendors spend nearly as much on their trackpads. MacBook trackpads have for a long time shared their touch sensitivity hardware with iPhones, which makes them extremely responsive and precise, and this is paired with a high end haptic motor to produce click sensations. Finally, their surface is oleophobic glass which reduces friction. This all combines to produce a great experience, but I’m positive that they cost notably more than the typical plastic diving board fare, and most laptop manufacturers are squeezing out margin with cheaper parts wherever they can.
It's sailant when using the Magic Trackpad on Windows: the acceleration curves don't match, the keyboard combinations are less natural, the gestures clunkier and the overall advantage of the trackpad is I think lesser. Mouses are a better fit on windows in every respects IMHO.
Handy that you can have them fully encased but there’s nothing really limiting any other laptop on this front. You just use an external dongle and have the same flexibility.
Maybe some people really want the enclosed module so they have fewer things to carry, but that’s a pretty small advantage that I’m not sure many people will value.
I could get something like this ( https://satechi.net/products/undefined/products/pro-hub-slim ) for my MacBook Air and come out ahead on weight and size.
Yeah, but thars another part to lose. I have tons of dongles and expansion bays, and have lost half a ton of them to the tides of school, work, travel, and carelessness. Most lost, some break because it's a huge portrusion out of your core machine. A few borrowed and never returned. One of them stuck at an office I got laid off from but never returned to post pandemic (but the severance hush money was worth more than me raising a fuss as opposed to replacing the $30 bay).
I don't need it to literally be plug and play, but I appreciate a more modular setup that is flush and stuck to the machine.
PS. Your link is 404.
This one should work, copied it from the address bar instead.
https://satechi.net/products/pro-hub-slim?variant=4019950983...
I'm usually either docked at my primary desk and only need a single USB-C, or moving from place to place and need 2 USB-A and a full size SD reader. I imagine the nice part with the insets is they're flushed so they'less surface to hit when moving the machine around.
I'd actually love to make my own insets that bakes the wireless dongles in them, that sounds doable.
I've yet to build one, but this project looks very interesting in that regard.
And with thunderbolt, you get to have one dongle-sized dock, that connects with one cable, and gives you the full gamut of ports. I really love being able to connect 1 cable when I get to my desk, and have multiple monitors, all peripherals, plus power cable instantly.
With all due respect -- meh.
I have a fairly old-ish laptop that I am not bothered to upgrade because a Ryzen 5500U is super capable to this day (and I don't do local LLMs) and it has a 10Gbps USB Type-C port, an HDMI port, and a USB 3.0 Type-A port. And an SD card reader.
I bought a hub. I put the laptop on a stand and plug its Type-C 10Gbps slot in the hub. Job done.
All this clamoring about being able to replace ports surely resonates with many people but to this day I don't view it as a true advantage. If you have to carry your laptop to a dedicated office, a stand and a hub are table stakes anyway. And that's not even touching a proper big display, keyboard and a mouse.
And furthermore, if making the ports flexible leads to too many design compromises then to me that means that I am making a bad deal.
I am periodically inspecting Framework laptops and I still find them lacking. Their appeal to tinkerers has IMO peaked and they should pivot to another pitch or they might not survive. Though I really, really hope they do. We need the competition.
That's the part that's hitting me the most.
I have two dongles for the wireless connectivity of both, and the choice is between sticking both in a dock and bring the same huge dock every single place I go, or move them from dock to dock as needed.
Having two USB-A would mean I stick them on the machine itself and never think about it anymore. Then if they could completely disappear inside the port extensions it would be a dream.
TBH I wouldn't be using the Framework as my primary work laptop either way, use cases are very limited and I already have the power and modularity needed with the Z13, but as a personal laptop for way wider use cases it ticks all the right boxes. If only it shipped outside of US and EU.
As mentioned, I'm sure Ftamework has valid usages. To me they command a much higher price premium than I'm comfortable with paying for those valid usages however.
I do love and want a libre booting stack. To me _that_ is the really good stuff. But they need to chill on prices.
