In a traditional automatic with a hydraulic torque converter between the engine and the gearing, you've got a problem: most transmissions use hydraulic pressure to actuate the gear selection, and hydraulic pressure is typically developed by turning of the input shaft. Some older automatics had a secondary pump to develop hydraulic pressure from turning of the output shaft. In those cars, you could select first gear, turn the ignition to run, and if you got it moving fast enough, it would develop pressure, actuate first gear, and then the transmission could turn the engine and off you were. Some references suggest pushing in neutral and selecting first when ready to start. References say you need to get up to about 15-25 mph for that; my VW Vanagon which shares the same engine type as the 914 (and is therefore a rear-engine sports car) can start the engine from a much slower roll; the speedometer rests at 10 mph, so who knows how fast I'm going, but probably walking speed.
